Do you want to customise your new barrel today?
What information is needed to place a barrel order?
- Material (Stainless steel or Chrome Moly)
- Calibre
- Twist Rate
- Length
- Profile (We can even copy your current profile)
​
Who is fitting your barrel to your action?
- One of our gunsmiths can support in fitting, chambering and test firing your new barrel.
- You might have a local gunsmith who can do this for you!
- But please note, as per the warranty card, this needs to be completed by an armourer/gunsmith.
What additional extra's might you consider for your custom rifle?
- Would you like a thread and cap? (EG. 5/8x24)
- Are you considering bolt or barrel fluting? (Spiral, straight, jewelled etc)
- Is a muzzle brake something you require?
- Would you like the metal finish to be hot blued or cerakoted?
General Information
The TSE range of calibres, twist rates and off the shelf profiles are changing all the time. Calibres range from .17cal to .50 cal.
​
Custom Profiling to the customer’s drawing or old barrel or to a known profile (E.g. BSA, Remington, Ruger, SMLE, Longtom ect.) is achieved by (CNC) computer numerical profiling. This means that over 200 profiles are already recorded and may be matched to the customers existing barrel at a nominal charge. This simplifies the installation by the Gunsmith as no stock work is required to be carried out to relieve the barrel channel to maintain the full floating gap between the barrel and stock as the manufacturer intended it to be. All barrel blanks must have 25mm (1″) removed from the muzzle when being installed.
​
The full range is available in 4140 high tensile chrome-moly steel (blued) and 416 stainless steel. All barrels are made from steel which has been supplied from the mill in a stress relieved state and to a specification to match TSE’s developed criteria. In the process of manufacture a minimum of (2) two more stress relieves are conducted inhouse using the latest in computer controlled, electric fired, stress relieving oven.
Available Twist Rates
- All barrels are available in chrome-moly (blued) and stainless steel except 17 and 20 calibres which are stainless steel only.​
​
- Custom profiling and length up to 800mm (31″) are available upon request.
​
- Every blank as supplied should have a minimum of 25mm (1″) removed from the muzzle when fitting.
Barrel Profiles
If you're interested in a PDF version of our profile drawings - email us at info@tsengineering.com.au! If you would like to create a custom profile for your new barrel - contact us to discuss the specifications you are after!
